FTE Maximal MIND 32M, Руководство пользователя

Страница: 25 / 34

User´s manual · MIND 32M
Reserved for technical modifications and/or errors
-
8
-
MIND 32M Version en_1.0 Fte maximal
3.2 Menu BIII-UHF4 MODE
Press Ok button to edit the configuration of the menu BIII-UHF4 MODE. It has two options available:
1. BIII-UHF4 : This mode allows BIII and UHF channels in the input BIII-
UHF4. The filters can be configured in this mode.
2. DAB : This mode assigned 8 of the 32 filters available to amplify all
BIII. This mode disables the options to supply a pre amplifier in the
input, the auto scanning channels for the input and disable the menu
BIII-UHF4. Remember to enable this mode is necessary at least 8
unused filters.
Press the button OK to edit. The current option blink in the display to
confirm is in edit mode. Use the buttons ◄ ► to select the mode and
press OK to confirm your selection.
Press
ESC to return to the main menu.
3.3 Menu LTE/5G
This menu selects the limit of the UHF band to scan in the option LTE/5G filter.
The options available are:
If set the TV standard B/G in the additional menu the values will be
a) 694 MHz: Allow channels until C48. (Default option)
b) 790 MHz: Allow channels until C60.
c) Off: Allow channels until C69.
If set the TV standard Aux in the additional menu the values will:
a) 701 MHz: Allow channels until C52. (Default option)
b) Off: Allow channels until C69.
Use the buttons
◄ ► of the keyboard to select and press Ok to confirm
3.4 Menu DC PASS
This menu enables or disables power for preamplifier in the UHF inputs. The voltage value is equal for all inputs.
Press OK to edit the voltage value for the preamplifier.
Use the buttons
◄ ► of the keyboard to select between the options <DC
PASS: 12V> and <DC PASS: 24V>. Press the button Ok to confirm.
After that, select with input allow or not. The numbers showing in the LCD
correspond to the UHF inputs. For example the 1 is the input
BIII-UHF1 and
the 4 is the input BIII-UHF4 .
The option in the right side of the “1:” (
BIII-UHF1 ) will be starting to blink to
indicate is in edit mode. Use the buttons ◄ ► of the keyboard to select one
of the next options:
1.
“+”
: Allow power for pre amplifiers in the input.
2.
“-”
: Does not allow power for pre amplifiers in the input.
Press
OK to confirm your selection for the input. Repeat for the other UHF inputs and confirm with the button OK .
Note: If the input BIII-UHF4 is configured as DAB mode, it will be not appear as option in the menu.
Press ESC to go back to the main menu.
< DC PASS: 12V >
1:- 2:- 3:- 4:-
< DC PASS: 24V >
1:+ 2:- 3:- 4:-
LTE/5G Filter
694 MHz