FTE Maximal MIND 32M, Руководство пользователя

Страница: 24 / 34

User´s manual · MIND 32M
Reserved for technical modifications and/or errors
-
7
-
MIND 32M Version en_1.0 Fte maximal
2.2 Control elements
The control of the programmable amplifiers MIND 32M will be done through two elements:
1. LCD with 2 lines and 16 characters for showing the information..
2. Control
buttons:
- MENU : Cancels the edition and return to the initial screen.
- OK : Enter in the next level of the menu, enable the edition mode or confirm the new
values of the parameters.
- ESC : Goes back one level in menus or cancels the current parameter edition.
- ◄ ► : Move through menus options or change the parameter values while is in edition
mode.
3 Menu and programming the amplifier
The programming of the amplifier is through the integrate programmer. Below
the steps and the menu options are explained:
When you connect the headend to the mains or exit of sleep mode, the LCD
shows an initial screen showing the model and software version of the
amplifier.
If no key is pressed for 60 seconds, the amplifier enter in sleep mode. To exit
the sleep mode and access the programming press any key on the keypad.
3.1 Main menu
Press the OK key to open the main menu. If the headens has a PIN code
previously set, a screen will appear asking to enter it.
Select the digits values with
◄ ► keys. Press OK button to confirm the values
The main menu contains the following options:
- BIII-UHF4 MODE : Allow configure the bands for the input BIII-UHF4.
- LTE/5G FILTER: Select the selecting the limit of the UHF band.
- DC PASS: In this menú can set the power for pre amplifiers in the UHF inputs .
- PREAMPLIFIERS: Allow enable or disable the preamplifier of the inputs BIII-UHF.
- AUTO SCANNING: Search the UHF signals in the inputs selected.
- BIII-UHF1: Permits add or change the configuration of filters assigned to the input BIII-UHF1.
- BIII-UHF 2: Allow add or change the configuration of filters assigned to the input BIII-UHF2.
- BIII-UHF 3 . Permits add or change the configuration of filters assigned to the input BIII-UHF3.
- BIII-UHF 4: Allow add or change Allow add or change in the input BIII-UHF4. This option only will be
displaying is not configure as DAB mode.
- OUT: Allow set the output level value and the equalization of the terrestrial band.
- FM : Allow change the settings of the amplifier for the FM band.
- AUX : Allow change the settings of the amplifier for the Auxiliary input
- ADDITIONAL : Selecting this menu is possible see information of the amplifiers and save and restore
configuration backups.
MIND 32M
v.20r50
=
PIN
***_
Move through options and menus with buttons ◄ ► of the keyboard .
OK to confirm and ESC to go back.
Press MENU at any time to go back to the initial screen.