Section 5
Acu-Test Evaluation Kit
26
FT742-SM (RS422 & RS485) Sensors
– User Manual
Commands Tab
The Command tab allows the user to view and send various software commands:
Figure 15: Command Line Terminal Display
•
Search for commands (for example: BR) or select them from the
‘Sensor Host Command’ menu. Selecting
a query will add the command to the ‘Execute Command’ window, a technical description will be displayed
•
This window shows the command structure and allows
the user to transmit commands using the ‘Execute
Command’ button. If the command has a response it will be shown below
Some SET commands require the user to add values into the command (for example: $//,DFP*//). The
user will be prompted to enter the missing settings
Note: The command console hides the <cr><lf> end-of-line terminal message and uses a default sensor
ID of $// to communicate with all sensor ID numbers (// is a wildcard value)
•
This window provides a description of the selected software command. Please refer to the user manual
software command section for full descriptions
