Section 6
Parameter Settings
66
FT205EV Wind Sensors
– User Manual
6.4.22 SV: Query the Software Version
Command
Parameter
SV
Command
Syntax
SET Sensor:
NA
QUERY Sensor:
$<listenerID>,SV?*<checksum><cr><lf>
$aa,SV?*hh<cr><lf>
Sensor Output:
$<talkerID>,SV=<SoftwareVersion>*<checksum><cr><lf>
$aa,SV=sssx.xss*hh<cr><lf>
$<talkerID>,SV=<SoftwareVersion>*<checksum><cr><lf>
$aa,SV=sssx.x.x*hh<cr><lf>
Parameters
<SoftwareVersion>
1.0 to 9.9
or
1.0.0 to 9.9.9
Software version of the sensor
Examples
Example 1
Read the software version number
Message
Comment
$01,SV?*//<cr><lf>
Query software version
$WI,SV= 7.5 *06<cr><lf>
$WI,SV= 7.5.1*19<cr><lf>
Sensor response (7.5)
Sensor response (7.5.1)
Description
The SV command returns the software version of the sensor.
There are three blank spaces between $WI,SV= and the beginning of the software version.
For software versions using the format 7.5 two blank spaces will follow.
FT may release incremental software versions with the numbering format 7.5.1, in this case
there will be no blank spaces following the software version.
