FT Fitness Technology PULLUP & DIP, Руководство пользователя

Страница: 23 / 37

www.pullup-dip.com
44 45
www.pullup-dip.com
Please note
4| INDOOR INSTALLATION
Required material:
䕲
Drilling template Pullup & Dip + tapes to fix
it to the wall
䕲
Indoor adapter
䕲
Water level + pencil
䕲
Percussion drilling machine
䕲
hammer
䕲
Suitable driller
Brick wall: 16 mm of diameter
(pre drill with smaller drills: 5 mm and
10mm of diameter)
Concrete wall: 10 mm of diameter
(pre drill with 5 mm)
䕲
Folding ruler
䕲
1 x spanner 16 mm
According to wall type:
䕲
Concrete wall:
• 8 x anchor bolt M 10 x 95
• Drill hole depth 75 mm, 10 mm of
diameter
䕲
Brick wall:
e.g. high hole brick, hollow block from light-
weight concrete, hollow block of concrete,
lime sand hole stone, lime sand full stone,
full brick
• 8 x anchor shells 15 x 85 mm suitable
for M10, drill hole depth 95 mm,
driller diameter: 16 mm
• 8 x threaded rod [M10 x 100 mm]
• 8 x nut [M10]
• 8 x washer [10. 5 DIN 125]
• 1 x multifunctional mortar
The distance from top edge of the outdoor adapter (see drilling
template) to ceiling should be at least 45 cm. Level the drilling
template very precisely with a water level and fix it with tape
to the wall.
Depending on your body size decide the final height by yourself.
After fixing the drilling template to the wall, predrill all eight
holes with the 5 mm driller. After that, drill all eight holes with
the 10 mm driller to final diameter. The drilling depth should be
at least 110 mm.
After that take away the drilling template from the wall and use
a vacuum or a blowout to get the drilling dust out of the holes.
Press the indoor adapter over the eight holes, use the hammer
to knock the dowels carefully into the wall and use the wrench
to turn the screws into the wall.
4| INDOOR INSTALLATION
Instruction for wall installation with fischer long shaft dowel of Pullup & Dip webshop