25
MAS-6100 / MAS-6100A
Input: YC1
Input: YC1
Bright [100] Contrast [100]
Bright [100] Contrast [100]
Adjusts the Brightness and Contrast of the image to your requirement.
Input: YC1
Input: YC1
Color [100] Hue [0]
Color [100] Hue [0]
Color is the amount of color saturation present in the image. Hue is the color “tint” parameter and the
adjustment range is +90 degrees through to -90 degrees with 0 being the default.
Input: YC1
Input: YC1
Sharpness [0]
Sharpness [0]
Within limits, you can enhance or soften the appearance of detail within an image. The Sharpness values go
both negative and positive, with 0 being the default. Note that over-enhancing an image has the side effect of
making it appear to be noisy and under-enhancing an image gives the appearance of poor video quality.
Input: YC1
Input: YC1
Luma delay [ 0]
Luma delay [ 0]
On occasion, a video input will have the color portion of the signal offset from the luminance portion. If you’ve
ever seen a poor quality comic book that has the outline of the cartoon character’s head in one place on the page
but the fl esh tones for the head offset slightly, you are seeing the print equivalent of Luminance to Chrominance
Phase Delay
.
Fortunately, your unit provides a way for you to make the two signals occur at the same time on
the selected image. The adjustment range provides both positive and negative levels of delay with 0 being the
default.
TRANSITION ADJUST GROUP
The Transition Adjust group selects and adjusts the behavior and duration of the CUT, FADE and WIPE
transitions. The sub menus will vary depending on which transition is selected as described below.
Adjust Transition
Adjust Transition
Transition [CUT FADE WIPE]
Transition [CUT FADE WIPE]
Select one of the three transition types. This becomes the current transition when a source is selected. The
default is the FADE transition.
Содержание MAS-6100
Страница 36: ...36 MAS 6100 MAS 6100A...
Страница 50: ...50 MAS 6100 MAS 6100A...
Страница 53: ...MAS 6200...
Страница 54: ...MAS 6200...