21
MAS-6100 / MAS-6100A
INPUT ADJUST GROUP
The Input Adjust menu group accesses the parameters associated with the processing amplifi ers used for each
input (RGB, CV, YC, etc.). They allow you to fi ne-tune an incoming signal to optimize its color, brightness or
even sharpness. Not all settings are available for all input type. It is recommended that you Store your settings
once you’re happy with them in readiness for future use.
Input: RGB1
Input: RGB1
Input to adjust [RGB1]
Input to adjust [RGB1]
This menu item selects the input connection for which you want to make adjustments to. As in the image above,
changes will only be made to the source connected to RGB1. Once the selection has been made, all changes
made using the following operating parameters will only apply to the selected input.
NOTE:
Selection of a CV/YC input will reveal different menu items that allow adjustments beyond those used
for RGB inputs. The menu discussions that follow relate fi rst to RGB inputs, then to CV / YC type inputs.
RGB INPUT SUB MENU ITEMS
Input: RGB1
Input: RGB1
Autoset status [Inactive]
Autoset status [Inactive]
Once the Autoset sense setting has been made, this menu item is accessed and activated. The Autoset sense
utility will then correct the pixel phase and then position the Top Left portion of the image and the Bottom
Right portion of the image. Once complete it then resume inactive status.
Input: RGB1
Input: RGB1
TL pos. adj. [ 0] [ 0]
TL pos. adj. [ 0] [ 0]
This menu item allows manual positioning of the Top and Left portion of the image. It is used to ensure that the
input signal is captured correctly, eliminating any black borders. These settings are often used to correct the
position of a PC signal on an input, or to eliminate any undesired noise at the top or bottom of a PAL or NTSC
video input.
Содержание MAS-6100
Страница 36: ...36 MAS 6100 MAS 6100A...
Страница 50: ...50 MAS 6100 MAS 6100A...
Страница 53: ...MAS 6200...
Страница 54: ...MAS 6200...