24
MAS-6100 / MAS-6100A
The following options are available for this menu item:
Mode
Function
Normal
The two interlaced fi elds are simply combined together. This will
often show artifacts on moving images, but can be used when the
input is known to be still.
Auto
Automatically selects Film 3:2 or Medium Range Motion
Compensation (M. Comp Med.) depending on whether Film
Mode is detected or not. For 1080i sources, a special de-
interlacing mode is selected to eliminate combing effects.
Film 3:2
Enables 3:2 pull down conversion of the incoming NTSC video.
(This option is ignored if the source is not NTSC video).
M.Comp Low
M.Comp Med.
M. Comp High
Enables Pixel Adaptive Motion Compensation. Three levels are
available with ‘Low’ providing the least compensation for Motion
and ‘High’ providing the most compensation.
Input: RGB1
Input: RGB1
Diagonal Interp. [Off]
Diagonal Interp. [Off]
This menu item allows the user to specify whether the input has diagonal interpolation applied to it when de-
interlacing occurs. This reduces ‘jagged’ artifacts on moving images, however is not suitable for noisy sources
where the noise could be mis-interpreted as a diagonal or sloping element of the picture.
Input: RGB1
Input: RGB1
F. swap [Off] Offset [-4-+3]
F. swap [Off] Offset [-4-+3]
This menu item is only available when “Advanced menus” in the System Settings Group is turned on. It can
correct for an interlaced source with abnormal odd/even fi eld characteristics. With F. swap “ON”, the odd and
even fi elds will be swapped. The “OFFSET” adjusts the video line offset for the odd fi eld relative to the even
fi eld. These setting options may be useful with certain graphics cards where odd and even fi elds are swapped.
Normal video sources will not require the use of this adjustment and should be left “OFF”.
CV & YC INPUT SUB MENU ITEMS
Of the above Input Menu items, the Autoset sense and Autoset status functions, RGB type and Pixel phase are
specifi c to RGB signals only. The rest of the Input menu items function with RGB, CV or YC type signals. In
addition, there are four additional Menu items that are only used with CV or YC type signals and these are
explained below:
Содержание MAS-6100
Страница 36: ...36 MAS 6100 MAS 6100A...
Страница 50: ...50 MAS 6100 MAS 6100A...
Страница 53: ...MAS 6200...
Страница 54: ...MAS 6200...