FSR EXPLORER XP Series, Инструкция по установке и эксплуатации

Страница: 38 / 44

38 Explorer XP Matrix
LOADING CONFIGURATIONS:
To load a configuration, click on the icon. From here you can select wish configuration file you
wish to load. The controller will not load connections that violate groups or protected outputs. The
following error is received if certain connections cannot be made:
SAVING CONFIGURATIONS:
To save a configuration, click on the icon. Enter the name you wish to assign to the
configuration file you are saving, and press enter. Now you can load your saved configuration file.
In a configuration file, connection, audio output level, and input trim level information is saved.
CONFIGURATION EDITOR:
To access the configuration editor, click on the icon. Once you’re in the “Configuration Editor”
you can load previously saved configurations and edit them and create a new configuration file and
save it under a new name.
The “Configuration Editor” is very similar to the main controller screen. You can make connections
and disconnections, as well as load and save configuration files, and they are done the same way as
in the main controller. When loading a configuration file in the editor, it is for the purpose of editing
it, not to load it into the controller. To exit the editor, you can either click on the “x” on the top right,
or click on the icon. You will then be asked if you’re sure you want to exit the application.