FSR EXPLORER XP Series, Инструкция по установке и эксплуатации

Страница: 32 / 44

32 Explorer XP Matrix
VIEWING CONNECTIONS:
To view the connections made, press the “Connection Info” button, . Once you press the
connection info button, you will receive the following pop-up menu:
You can also view an inputs or outputs connection by right-clicking an input or output, and going
to “input info” or “output info” (see images below). Use the drop-down menu to change between
inputs or outputs.
DISCONNECTING:
To disconnect an input or output, just drag it’s icon into the trash can, , on the bottom right. If
you drag an input into the trash can, it will be disconnected from every output it was connected
to, the same goes for the output, it will be disconnected from every input. If you wish to be more
specific on what to disconnect you can right-click on the input button and go to “Disconnect.” Once
in the inputs disconnect menu you can select the output you wish to disconnect it from and if you
want to disconnect audio, video, or both from the output (see left image below). In the outputs
disconnect menu, you can check which source you wish to disconnect from, audio or video (see right
image below). Disconnections of protected outputs cannot be made (see
protect output sections).