13
Note: All commands and responses are in ASCII. Commands and are white space
insensitive and are terminated with #.
4). General Commands:
Command
Function
Note
PTP Function
Allows all outputs to be switched to the specified
inputs in a single command.
(Ex. Input 1 to output 1, input 2 to output 2, etc)
Reboot
Reboot matrix
Restore Factory Setting
Restore unit to factory clearing any user settings
Standby
00: Standby Mode
01: Cancel “Standby Mode”
5). PTP command:
Format:
@W 04 O1 O2 O3 O4 #
Parameter Description:
O1
= Input number (0-3) to route to output 1
O2
= Input number (0-3) to route to output 2
O3
= Input number (0-3) to route to output 3
O4
= Input number (0-3) to route to output 4
Example: @W 04 02 02 01 00 #
Route input 3 to outputs 1 and 2, input 2 to output 3, and input 1 to output 4
6). Output Routing Command:
Format:
@W OO II #
Parameter Description:
OO
= Output Number as indicated below:
II
= Input Number as indicated below:
Command
Description
00
Output1
01
Output2
02
Output3
03
Output4
04
All Output
00
Input1
01
Input2
02
Input3
03
Input4
Example: @W 00 03 #
Output 1 comes from Input 4