16
Example Status Request:
@R 30 #: (Get Status of Output 1)
Response: @R 30 01 04 XX #
Output 1 is connected to input2, Input2 EDID is set to “copy from display 1”, EDID video/audio data
is not valid.
AA
= Selected EDID file as defined in EDID setting command above
BB
= EDID file parameters as defined in EDID setting command above
Note: All “copy from display” EDID settings return XX (invalid) for this parameter
Example 1:
@R 34 #:
(Get Status of All Outputs)
Response:
@R 30 00 04 XX #
@R 31 01 00 C9 #
@R 32 02 01 C9 #
@R 33 03 04 XX #
Output 1 is connected to input1, Input1 EDID is set to “copy from display 1”, EDID video/audio
data is not valid.
Output 2 is connected to input2, Input2 EDID is set to “1080P”, EDID video/audio data indicates
HDR, 48bit, 7.1CH, 3D
Output 3 is connected to input3, Input3 EDID is set to “4K2K_30”, EDID video/audio data indicates
HDR, 48bit, 7.1CH, 3D
Output 4 is connected to input4, Input4 EDID is set to “copy from display 1”, EDID video/audio
data is not valid.
Example 2:
@R 35 #:
(Get All Input Status)
Response: @R 35 CC #:
CC
= input channel signal status (HDMI and +5V present (cable connected to source)) as
described below:
“1” signal is present, “0” signal is not present
Example Input Status Request:
@R 35 #:
Response:
@R 35 CE #
HDMI signal present on inputs 4 and 3, +5 volts present on pin 18 of inputs 4, 3, and 2.
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
In 4 HDMI
In 3 HDMI
In 2 HDMI
In 1 HDMI Input 4 +5V Input 3 +5V Input
2
+5V
In 1 +5V
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
