FSR CN-2002, Руководство оператора

Страница: 60 / 69

Description:
Video Peaking adjustment.
Parameters:
n - Peaking setting; n[0|1|2|3] MIN | NOM | INC | MAX
sclr - Scaler [A|B|M|P]; Scaler A | Scaler B | Main | Preview
Example:
VPK 2 P : Set the video peaking on Preview to Increased.
Command: VRBOS n
Description:
Enables or Disables verbose mode for queries.
Parameters:
n - n[0|1], Disable or Enable
Example:
VRBOS 1: Enable verbose mode.
Terminal Remote Control
Emulation of the Compass S2 Front Panel is possible via the Remote Control port on the back of the Compass S2.
Two remote control protocols are available: the Folsom/Vista protocol used by remote controllers that wish to emulate
key presses and knob turns and the FSR protocol which additionally receives front panel LED status.
Terminal Key Code <TKC KeyCode>
Description: Issued by the Controller to send the “keycode” (see Table 2) for the currently pressed key
or key combination.
Note: “KeyCode” is a hexadecimal key code expressed in ASCII format.
Example: TKC 13 – sends DSLV key depression.
Terminal Encoder Rate <TER n [-100 to 100]>
Description: Allows a remote control unit to emulate the function of the encoder knob on the front
panel. Absolute value determines the speed at which the knob is rotating and must be
greater than 3. Positive values indicate Counter-Clockwise motion. Negative values
indicate Clockwise motion.
Example: TER -56 – Rotate the know in a clockwise direction at a medium rotation speed.
Front Panel LED Status Request <TLSR >
Description: Issued by the Remote Controller to request that the Graphics board return the current LED
status of the Front Panel. The Graphics board returns a 46-byte string that indicates the
status of all LEDs as o,y,r,g,b (off, yellow, red, green, blink).
Example: TLSR may return “ooooooooogoooooooooooooooogoooooooroogooooooorog” which
informs the external device that the A/V LED is green, the video source '1' LED is green,
the audio source '1' LED is green, the video source BLK LED is red, the audio source
MUTE LED is red and the LINE LED is green.
52 Compass
S
2