1.ABOUT THIS MANUAL
1.1 Purpose
This manual describes the assembly, installation, operation and troubleshooting
of this unit. Please read this manual carefully before installations and operations.
1.2 Scope
This manual provides safety and installation guidelines as well as information on
tools and wiring.
The following cases are not within the scope of warranty:
(1) Out of warranty.
(2) Series number was changed or lost.
(3) Battery capacity was declined or external damaged.
(4) Solar charger controller was damaged caused of transport shift, remissness,
ect external factor.
(5) Solar charger controller was damaged caused of irresistible natural disasters.
(6) Not in accordance with the electrical power supply conditions or operate
environment caused damage.
1.3 Safety Instructions
WARNING: This chapter contains important safety and operating
instructions. Read and keep this manual for future reference.
1. Before using the unit,read all instructions and cautionary markings on the unit,the
batteries and all appropriate sections of this manual.
2. Do not disassemble the unit. Take it to a qualified service center when service or
repair is required. Incorrect re-assembly may result in a risk of electric shock or fire.
3. To reduce risk of electric shock, disconnect all wirings before attempting any
maintenance or cleaning. Turning off the unit will not reduce this risk.
4.
CAUTION
- Only qualified personnel can install this device with battery.
5.
NEVER
charge a frozen battery.
6. For optimum operation of this charger,please follow required spec to select
appropriate cable size. It’s very important to correctly operate this charger.
7. Be very cautious when working with metal tools on or around batteries. A potential
risk exists to drop a tool to spark or short circuit batteries or other electrical parts and
could cause an explosion.
8. Please strictly follow installation procedure when you want to disconnect PV or
battery terminals.Please refer to INSTALLATION section of this manual for the
details.
9.
GROUNDING INSTRUCTIONS-
This charger should be connected to a
permanent grounded wiring system.Be sure to comply with local requirements and
