23
On Screen Display (OSD) Menus
FM-E3204DGC
Submenus under the SETUP menu
1. LANGUAGE Changes the OSD language. (10 languages)
2. OSD OVERLAY Adjusts the OSD transparency.
3. OSD POSITION Changes the OSD position. (9 Positions)
4. OSD MENU TIME Adjusts the length of time the OSD Menu is present on the screen. (range: 10~60
seconds)
5. OSD LOCK Sets the OSD lock. To unlock, press the PLUS and UP buttons.
6. BACKLIGHT Increases or decreases the backlight. (Range : 0~100)
7. BACKLIGHT MODE Changes the backlight control mode. Manual: backlight is controlled manually.
Auto: Auto backlight control.
8. POWER ON DC5V Enables or disables the DC5V output.
9. RESET Changes all the OSD values to factory default.
Submenus under the LAYOUT menu - Single
1. LAYOUT Changes the image layout. (Single, PIP, PBP, Triple, Quad)
Submenus under the LAYOUT menu - PIP
1. LAYOUT Changes the image layout. (Single, PIP, PBP, Triple, Quad)
2. MODE (not available)
3. WINDOW SELECT Selects the active window.
4. INPUT SWAP Swaps the position of the primary and secondary images.
5. PIP SIZE Changes the PIP size.
6. PIP POSITION Changes the PIP position. (L-Top, R-Top, Mid, L-Bot, R-Bot)
Submenus under the LAYOUT menu - PBP
1. LAYOUT Changes the image layout. (Single, PIP, PBP, Triple, Quad)
2. MODE Changes the layout mode. (Mode1, Mode 2, Mode 3)
3. WINDOW SELECT Selects the active window.
4. INPUT SWAP Swaps the position of the primary and secondary images.
Submenus under the LAYOUT menu - Triple
1. LAYOUT Changes the image layout. (Single, PIP, PBP, Triple, Quad)
2. MODE Changes the layout mode. (Mode1, Mode 2, Mode 3, Mode 4)
3. WINDOW SELECT Selects the active window.
Submenus under the LAYOUT menu - Quad
1. LAYOUT Changes the image layout. (Single, PIP, PBP, Triple, Quad)
2. MODE Changes the layout mode. (Mode1, Mode 2, Mode 3, Mode 4, Mode 5)
3. WINDOW SELECT Selects the active window.
Submenus under the 3D menu
1. 3D MODE Disables or enables 3D mode. (Available only in single layout mode and with smart input off .)
2. 3D FORMAT Changes 3D Format. (DP1/DP2/HDMI/DVI - Side By Side, Line By Line, Top Bottom). (SDI -
Side By Side, Line By Line, Top Bottom, SDI level B-DS, SDI dual Input).
3. L/R SWAP Changes left eye and right eye image.
4. PARALLAX Selects parallax mode. (Both, Left, Right)
5. BOTH/LEFT/RIGHT
BOTH: Adjusts the parallax with left and right input.
LEFT: Adjusts the parallax with left input.
RIGHT: Adjusts the parallax with right input.