20
FSN display monitors come equipped with a rich set of features for system set-up, image
adjustments, and screen layout control. These features are managed through the On Screen
Display, or OSD. Some options presented in the OSD are contextual and vary depending on the
active input signal. See the Controls section for a complete description of each OSD button.
1. Enter the OSD
To activate the OSD menu, press the MENU button on
the front of the display monitor. To close the OSD menu,
press the menu button to exit from the main menu or a
sub menu.
2. Pick a Main Menu Category
After entering the OSD, use the UP
and DOWN
buttons on the front of the display monitor
to navigate to a main menu category: PICTURE, COLOR, ADVANCED, SETUP or LAYOUT.
3. Pick a Submenu Category
After entering the desired main menu category, press the
+
button to enter the submenus
associated with the selected main menu. Use the UP
and DOWN
buttons to navigate
to the desired submenu, then adjust as needed with the
+
and
-
buttons. Select the MENU
button to exit from the submenu or main menu.
On Screen Display (OSD) Menus
Main Menu
Categories
Sub Menu
Categories
Sub Menu
Value or
Setting
Video
Source
Information
Submenus under the PICTURE menu
1. BRIGHTNESS Increases or decrease the brightness. (Range : 0~100)
2. CONTRAST Increases or decreases the contrast. (Range : 0~100)
3. SATURATION Increases or decreases the saturation. (Range : 0~100)
4. SHARPNESS Increases or decreases the sharpness. (Range : 0~4)
5. VIVIDNESS Sets image vividness. (Off , Low, Mid, High) Enhances image quality with minimal artifi cial eff ects.
6. VIDEO RANGE Select a video range setting. (0~255, 16~235, or AUTO)
AUTO: automatically changes to 0~255 for RGB format, or to 16~235 for YUV format.
On Screen Display (OSD) Menus
FM-E3203DC
