FSN FM-A2701D, Руководство пользователя

Страница: 35 / 40

FSN2006 - 4/2019
English - 35
Cleaning Instructions
Precautions
Before cleaning, switch the display in stand-by position to prevent the control touch panel from
being activated inadvertently by sweeping over the front fi lter. In stand-by position the touch
panel cannot be activated by just sweeping over them. To switch the display on again, you must
press the stand-by key again.
Take care not to damage or scratch the front fi lter or LCD panel.
• Be careful with rings or other jewelry that can touch the front fi lter.
• Do not apply pressure on the front fi lter or LCD panel.
• Do not use cloth made from synthetic material (polyester) as this may cause electrostatic dis-
coloration within the LCD.
• Do not apply or spray liquid directly to the front fi lter, panel or cabinet as excess liquid may
cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth.
• Follow your hospital protocol for the handling of blood and body fl uids.
• The display is not disinfected or packed in sterile environment.
• Follow your hospital protocol in case the display needs to be disinfected prior to installation.
Front Filter
Proceed as follows:
1. Remove dust with a dry, lint-free, non-abrasive soft cotton cloth.
2. Remove fi ngerprints or grease using a lint-free, non-abrasive soft cotton cloth that is lightly
moistened with plain water or a mild commercial glass cleaning product suited for coated
glass surfaces.
3. Gently wipe dry with a dry cotton cloth.
The following products are tested and approved:
• Misty Clear Lemon 10 Disinfectant
• Bohle glass cleaner
• Zep Heavy-duty glass & all surface cleaner
• Klear Screen
• Screen TFT (Kontakt Chemie)
• Incidin Foam (Ecolab)
• Microzid
• Mild detergent
• Isopropyl alcohol with concentration < 5%
• Household bleach (generic sodium hypochlorite, solutions of 5.25% sodium hypochlorite
diluted with water between 1:10 and 1:100)