1-5
1.4 K3000 Setup Mode cont.
Left Display
Right Display
Action
DST SETUP
This is daylight savings time setup. In the United States, daylight savings time begins each year at 2:00 A.M.
on the second Sunday in March, with clocks moving ahead one hour. Daylight savings time ends each year at
2:00 A.M. on the first Sunday in November, with clocks moving back one hour. For the two states and
international locations, which do not use DST, set to disabled.
OFF
OFF
Press and hold
until Product Setup is displayed.
Product Setup
Blank
Press
to scroll to Vat setup and press
.
Vat setup
Enter code
Enter 3228.
DST
ENABLED
Press
to scroll choices DISABLED and ENABLED. Press
.
(This enables or
disabled daylight savings time. Default is enabled.) If disabled is chosen, pressing the
button, displays exit. Press the exit scan
button three times to exit.
DST START
MONTH
3
Enter the daylight savings time starting month using the 1-10 keys. (Default is US
government starting month “3”.) Press
.
DST START
SUNDAY
2
Enter the daylight savings time starting Sunday using the 1-10 keys. (Default is US
government starting Sunday “2”.) Press
.
DST END MONTH
11
Enter the daylight savings time ending month using the 1-10 keys. (Default is US
government ending month “11”.) Press
.
DST END
SUNDAY
1
Enter the daylight savings time ending Sunday using the 1-10 keys. (Default is US
government ending Sunday “1”.) Press
.
EXIT
Exit
Press
button once and press
to scroll to System, Time/Date, Filter, E-Log or Change
Password. With desired choice displayed, press
or press the Exit/Scan button three
times to return the controller to OFF.
filter
Blank
Press
.
Global filter
count
20
Press
. (Changes the total number of cooks that occur before a filter prompt. The default
is 20.)
Eod filter time
21:00
Use numbered buttons to change end of day filter alert time. Press
.
1 polish timer
EnableD
Press
to scroll to choice and press
.
(This enables or disables the polish timer.)
1 polish time
08:00
Use numbered buttons to change time (use 10 for 0). (This is the time the first polish
prompt will occur each day. The default is 8:00 AM.) Press
.
1 polish
duration
30
Use numbered buttons to change (use 10 for 0). (This is the duration, in minutes for a
polish. The default if 30 minutes.) Press
.
1 polish delay
time
00:00
Use numbered buttons to change time (use 10 for 0). (This is the amount of time which an
operator can delay the start of a polish.) Press
. After the delay the operator must
polish.
1 polish start
tempr
300F
Use numbered buttons to change temperature (use 10 for 0). (This is the temperature
required for a polish to begin.) Press
.
2 polish timer
enabled
Press
to scroll to choice and press
.
(This enables or disables the second polish
timer.)
2 polish time
14:00
Use numbered buttons to change time (use 10 for 0). (This is the time the second polish
prompt will occur each day.) Press
.
2 polish
duration
30
Use numbered buttons to change (use 10 for 0). (This is the duration, in minutes for a
polish. The default if 30 minutes.) Press
.
2 polish delay
time
01:00
Use numbered buttons to change time (use 10 for 0). (This is the amount of time which an
operator can delay the start of the second polish. The default is one hour.) Press
. After
the delay the operator must polish.
Continued on the following page
