1-1
CHAPTER 1: K3000 CONTROLLER INSTRUCTIONS
1.1 Using the K3000
Pressed Individually:
Scroll
menu, programming options.
Pressed Simultaneously:
Launches polish.
Scan programmed
menu items.
Product Button LED:
Lit when button
is active. All buttons with a common
setpoint light simultaneously.
ON/OFF
Blue product buttons
start cooks in left
display. Press to start
a cook cycle.
Pressed Individually:
Scroll displayed menu and
programming options.
Pressed Simultaneously:
Changes to second
language if set up.
Access filter
menu.
See
page 1-6.
Enter codes, respond to
left-display prompts.
Check recovery.
See
page 1-2.
Check actual,
setpoint
temperatures and
software version
Exit Cool Mode
250°F (121°C);
Return to setpoint.
ON/OFF
White product buttons
start cooks in left
display. Press to start
a cook cycle.
ON/OFF
•
Press ON/OFF button fryer heats to setpoint or idle temperature and displays: COOL or DROP.
Cooking
•
Fryer displays COOL or DROP
•
COOL display:
Press product button; fryer heats to setpoint and displays DROP.
•
Press product button and drop product.
•
DROP display:
Press product button and drop product. (Product buttons 1-5 and 11-15 start cooks on the left
display. Products 6-10 and 16-20 start cooks on the right display.)
•
DONE display:
Press product button to cancel alarm.
•
Press and hold product button to cancel cook cycle.
Responding to Polish Prompt
•
Controller displays Polish Now, alternating with Yes No.
•
Press Yes (button under Yes display) and the polish cycle launches.
Controller displays Cool after polish cycle.
Controller Button Navigation
•
Product:
Active when adjacent LED is lit.
Press to launch cook cycle. Press and hold to stop a launched cook
cycle. Press at end of cook cycle to halt alarm.
•
Scan:
Press once, all product buttons are lit; Select Product displayed. Press product button to view product
name. Press Scan again to repeat. Press Scan twice to return to normal operation.
•
Left/Right Arrows:
Navigate options in left display.
•
Up/Down Arrows:
Navigate options in right display. Press the up/down arrow simultaneously to change to a
second language if one is selected in setup.
•
Exit Cool:
Set fryer’s cook cycle exit temperature to 250°F (121°C) or setpoint.
•
Thermometer: Fryer ON:
Press and release for setpoint/left; vat temp/right.
•
Thermometer: Fryer OFF:
Press to display temperature, time, date, system version, K3000 version and circuit
board versions.
•
Checkmark: Fryer OFF:
Press and hold 3 seconds: Scroll filter usage; Press and hold 10 seconds: Product
setup.
•
Checkmark: Fryer ON:
Respond to prompts. Press and release: Check recovery. Press and hold 4 seconds:
Info Mode.
•
Filter: Press and release:
Cooks remaining to filter cycle.
Press and hold:
Filter options: Filter and Dispose.
