In the interest of continual product development we reserve the right to change any of the
details and specifications without notice.
Page 6
SETTING THE STORAGE TEMPERATURE
The temperature regulation parameters as well as recommended defrost times for each cabinet
are based on Frost-Tech experience and on the results obtained in laboratory tests.
Regulation which is different from those recommended may be necessary for reasons of non-
standard ambient and/or operating conditions
The units are delivered with the regulation already factory-set. All temperature and defrost
regulations must be set by a qualified refrigeration engineer.
The buyer responsibility to ensure that the equipment will be fit for the purpose for which the
Buyer intend to use the equipment.
ADJUSTING THE CONTROLLER
Please refer to the specific controller instructions included
