In the interest of continual product development we reserve the right to change any of the
details and specifications without notice.
Page 14
WARNING
•
Use compressor/condensing unit in a grounded system only.
•
Proper compressor/condensing unit cooling according to specification must be assured.
ADDITIONAL INSTRUCTIONS FOR SERVICE INTERVENTION ON THE
COMPRESSOR/CONDENSING UNIT.
WARNING
•
For service intervention, follow the instructions of application manufacturer.
WARNING
•
Turn off power supply before servicing the compressor/condensing unit.
WARNING
•
Discharge all capacitors before servicing the compressor/condensing unit.
WARNING
•
Remove pressure from both high and low pressure side before removing the
compressor/condensing unit.
WARNING
•
Use tubing cutter to open the refrigerant circuit. Do not use a torch.
WARNING
•
For compressor/condensing unit replacement, follow the instructions of the original
equipment manufacturer. Use only with electrical components specified by the
manufacturer.
WARNING
•
On applications where flammable refrigerant is used, do not weld the tubes by torch, but
connect the compressor/condensing unit tubes by other means such as lock ring.
WARNING
•
Before energizing the system, check the compressor/condensing unit grounding and
make sure electrical components and covering are fixed properly.
WARNING
•
Connect the equipment only to a power supply with a proper ground connection, over
current protection and electrical safety devices.
WARNING
•
Do not use disassembled compressor again.
WARNING
•
Disassembled compressor used with flammable refrigerant may contain certain amount
of refrigerant in the oil. Do not mix this oil woth other oils and treat it properly, due to
its flammability risk.
WARNING
•
Before energizing the condensing units, ensure that the finger guard of the fan motor is
properly installed.
