Frontier TR2058, Руководство оператора

Страница: 32 / 44

Every 8 hours:
1. Grease the rotor support (see fig. 15) and the roller support (see fig. 17), the
driveline cross and bearings and the telescopic tubes.
Apply two or three shots
of grease to the driveline cross and bearings and the telescoping shafts. Apply the
same amount to the rotor and roller bearings.
2. Gearbox oil level: Check gearbox oil level, it should be between
1
/
2
and
2
/
3
full. If
needed add either
SAE
90 wt. or
SAE
140 wt. gear oil.
Whenever the hopper is used for fertilizer spreading it is extremely important to
carefully clean out the hopper and wash the machine with hot water. Do not
forget that fertilizer is highly corrosive and should be not left in the hopper any
longer than necessary.
M
AINTENANCE
32
FRONTIER
A
ERATOR
-O
VERSEEDER
O
PERATOR
’
S
M
ANUAL
1
2
3
4
Fig. 16
1. chain case grease access plug
2. chain case
3. stand
4. side plate
1
2
3
4
Fig. 17
1. greasing the roller support
2. rear roller
3. tickler tines
4. roller adjustment turnbuckle