Frontgate Holiday 68607, Руководство пользователя

Страница: 20 / 21

USER INSTRUCTIONS
TO REPLACE LIGHT BULBS
CAUTION:
FIRST UNPLUG YOUR PRODUCT FROM ANY POWER SOURCE.
1.
To reduce the risk of overheating, replace burned-out light bulbs promptly .Use only
2.5 volt light bulbs only.
2. Grasp plug and remove from the receptacle or any other electrical outlet device. Do not
unplug by pulling
on
the cord.
3. Pull the light bulb and its attached plastic base straight out of light bulb holder.
4. Replace light bulb with only 2.5 volt
super
bright
type
light (provided with product).
5. If the
new lamp
base does not fit the replacement light bulb, follow the steps
below before
step
4.
a. Remove the base of burned out light by straightening light leads and gently pull bulb out.
b.Thread metal leads of new lamp through hose in old base with one lead in each hold.
c. After lamp is fully inserted into base, bend each lead up, like other lights
in
the light set so that the leads
will
touch the
contacts inside the light socket.
TO REPLACE A FUSE:
CAUTION:
FIRST UNPLUG YOUR PRODUCT FROMANY POWER SOURCE.
1. Grasp plug and remove from the receptacle or other outlet device. Do
not
unplug by
pulling
on
cord.
2. Open fuse cover. Slide
open
fuse access cover on top of attachment plug towards plug's
metal
prongs
or blades.
FUSECOVER
SLIDES FORWARD
3.
Remove fuse carefully.
4. Risk of fire. Replace fuse ONLY with 3 Amp 120 Volt fuse. (Provided with product).
5. Close fuse cover.
Return
the sliding fuse cover back to its former closed position on
attachment plug.
6. Risk of fire. Do not replace attachment plug because it contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged
Please contact one of our Product Specialists for assembly assistance or questions
at
1-800-537-8484 or email ps@frontgate.com.
Specialists are available weekdays 8:00 a.m. to 8:00p.m.EST or Saturday 9:30 a.m. to 6:00 p.m.