Fronteq FS0507T Скачать руководство пользователя страница 3

Страница: 3 / 48

FS0507T

PN 60711000162

First , sincerely thank you for purchasing Eurocrane

（

Changzhou

）

products.

◆

In order to make full use of the performance of this machine, this manual carries out

the correct use method and daily inspection and maintenance methods.

◆

In order to make the machine safe to use, the operator should have sufficient

knowledge and necessary skills.

◆

Please fully understand the contents of the operation, checkpoint, and maintenance

described in this manual before using this machine. And on this basis,

Implement

"safe operation, correct management".

Please observe the safety precautions described in this manual. Slacking this

precaution will result in injury or even death.

◆

Please keep this instruction manual at hand of operators or maintenance personnel

so that you can read it at any time.

◆

When this manual is lost or damaged, please order it from a nearby dealer

immediately.

◆

When this machine is transferred, please attach this manual to the next owner.

◆

Due to the improvement of the product, some details of the contents of this

manual may be inconsistent with this machine. If unknown, Please consult your nearest
dealer.

◆

When inquiring about the machine, please indicate the MODEL and manufacturing

number of the machine (SER.NO.

）

Содержание FS0507T

















































Результаты поиска

Содержание FS0507T

Отзывы:

Похожие инструкции для FS0507T

Бренды по названию

Популярные бренды

Fronteq FS0507T, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание FS0507T

Отзывы:

Похожие инструкции для FS0507T

Бренды по названию

Популярные бренды