Control elements and connections
Safety
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
▶
Read and understand this document.
▶
Read and understand all the Operating Instructions for the system components,
especially the safety rules.
As a result of software updates, you may find that there are functions available on your
device that are not described in these Operating Instructions, or vice versa.
Certain illustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.
Connections
(4)
(6)
(5)
Controls and connections on the front and back of the
machine
(2)
(3)
(1)
(1)
Mains switch
(2)
Shielding gas connection socket (TP 2500/3500 TIG only)
For connecting the gas hose
(3)
Dust filter
Where the fan draws in air
-
Prevents contamination of the housing interior if large amounts of dust have
accumulated
NOTE!
The manufacturer strongly recommends that a dust filter be used with the power
source.
(4)
(+) current socket with bayonet latch
For connecting the:
17
EN
