Fronius Smart Meter TS 5kA-3, Руководство по эксплуатации

Страница: 8 / 44

Maintenance and repair work must only be carried out by an authorised specialist.
It is impossible to guarantee that bought-in parts are designed and manufactured to meet
the demands made on them, or that they satisfy safety requirements. Use only original
spare parts (also applies to standard parts).
Do not carry out any alterations, installations, or modifications to the device without first
obtaining the manufacturer's permission.
Components that are not in perfect condition must be changed immediately.
Copyright Copyright of these operating instructions remains with the manufacturer.
The text and illustrations are all technically correct at the time of printing. We reserve the
right to make changes. The contents of the operating instructions shall not provide the
basis for any claims whatsoever on the part of the purchaser. If you have any sugges-
tions for improvement, or can point out any mistakes that you have found in the instruc-
tions, we will be most grateful for your comments.
Data protection The user is responsible for the safekeeping of any changes made to the factory settings.
The manufacturer accepts no liability for any deleted personal settings.
Intended use The Fronius Smart Meter TS is a fixed piece of equipment for public grids of TN/TT sys-
tems and records self-consumption and/or individual loads in the system. The Fronius
Smart Meter TS is required for systems with a battery storage system and/or a Fronius
Ohmpilot installed for communication between the individual components. The installa-
tion is carried out on an indoor DIN rail with corresponding back-up fuses, which are
adapted to the cable cross-sections of the copper conductors and to the maximum cur-
rent of the meter. The Fronius Smart Meter TS must only be operated in accordance with
the specifications in the enclosed documentation and in accordance with local laws, reg-
ulations, provisions, standards and within the limits of technical possibilities. Any use of
the product other than as described in the intended use shall be deemed to be not in
accordance with the intended purpose. The available documentation forms part of the
product and must be read, observed and kept in good condition. It must also be access-
ible at all times at the place of installation. The available documents do not replace
regional, state, provincial or national laws, or regulations or standards that apply to the
installation, electrical safety and use of the product. Fronius International GmbH
assumes no responsibility for compliance with or non-compliance with these laws or reg-
ulations in connection with the installation of the product.
Interventions on the Fronius Smart Meter TS, e.g. modifications and alterations, are not
permitted. Unauthorised interventions will void the warranty and warranty claims and, as
a rule, void the user's authority to operate the equipment. The manufacturer shall not be
liable for any damage resulting from such use.
Reasonably foreseeable misuse:
The Fronius Smart Meter TS is not suitable for the supply of life-sustaining medical
devices or for the billing of subtenants.
Information on
the device Technical data, markings and safety symbols are located on the Fronius Smart Meter TS.
These must NOT be removed or painted over. They warn against incorrect operation
which can lead to serious injury and damage.
8