Fronius Calibration system 2.0, Руководство по эксплуатации

Страница: 88 / 100

24
Define the calibration class:
o Precision
o Standard
25
Click [Start automatic calibration process]
The calibration process starts.
When a calibration process is active
- A corresponding notification is displayed
- The [Interrupt calibration] button is available
- All measuring points are checked one after the other
- Current measured values are displayed
- A progress bar with the remaining time is displayed
If the calibration process is interrupted before the welding wire has been cal-
ibrated, a corresponding notification is displayed.
26
Change over welding system for wire calibration
(see page
84 )
CAUTION!
Risk of injury from emerging welding wire.
As soon as the calibration process resumes, the welding wirefeed starts and the
welding wire emerges.
▶
Keep the welding wire calibration system away from the head and body and
wear suitable protective goggles.
▶
Make sure that when the welding wire emerges, it does not touch any elec-
trically conducting, earthed or live parts.
▶
Make sure that there is sufficient space for the emerging welding wire (ap-
prox. 10 m).
▶
Make sure that no one is endangered by the emerging welding wire.
27
click [OK] to start calibrating the wirefeeder system
When wire calibration is complete, a message to reverse the polarity of the
WeldCube Connector is displayed.
88