Fronius Calibration system 2.0, Руководство по эксплуатации

Страница: 79 / 100

Notes on voltage calibration:
- The maximum voltage during calibration is 30 V.
- The same resistance of 480 mOhm is used for all measuring points.
- The calibration software automatically specifies the measuring points to be
measured.
- The voltage is regulated by the current;
the predefined current values are standard values and may have to be adjus-
ted to achieve the specified voltages.
Recommended points for calibration:
Voltage [V] Resistance [mOhm] Current on the device
[A]
10 480 20
15 480 29
20 480 39
25 480 49
30 480 59
Calibration procedure
1
Start the calibration program
2
Click [New calibration]
The
preliminary settings / contractor data
are displayed.
3
Enter the details for a new contractor (= Person performing calibration):
- Name
- Address
- Postcode
- Calibration technician
4
Click on [Add]
or
select current contractor from the list shown
5
Enter the serial numbers of the measuring equipment:
- Calibration system
- Gas measurement system
6
Click [Next >]
The
preliminary settings / customer data
are displayed.
7
Enter the details for a new client:
- Name
- Address
- Postcode
- Customer number
79
EN