Fronius Calibration system 2.0, Руководство по эксплуатации

Страница: 67 / 100

Calibrating the
TransPocket
welding system IMPORTANT! Before starting the calibration process:
- The power source to be calibrated must be connected to the calibration sys-
tem.
- The power source to be calibrated must be switched on at least 5 minutes
before the calibration process starts.
The calibration process is started from the calibration software on the com-
puter / laptop.
1
Set manual metal arc welding mode on the power source
2
Start the calibration program
3
Click [New calibration]
The preliminary settings / contractor data are displayed.
4
Enter the details for a new contractor (= Person performing calibration):
- Name
- Address
- Postcode
- Calibration technician
5
Click on [Add]
or
select current contractor from the list shown
6
Enter the serial numbers of the measuring equipment:
- Calibration system
- Welding wire calibration system
- Gas measurement system
7
Click [Next >]
The preliminary settings / customer data are displayed.
8
Enter the details for a new client:
- Name
- Address
- Postcode
- Customer number
9
Click on [Add]
or
select current client from the list shown
Under Others, inventory numbers, order numbers and observations can be
entered.
67
EN