Fronius ActiveCharger 1000 Скачать руководство пользователя страница 64

Страница: 64 / 72

Start-up

Safety

WARNING!

Danger due to incorrect operation and incorrectly performed work.

This can result in serious injury and damage to property.

► All the work and functions described in this document must only be carried out by

trained and qualified personnel.

► Read and understand this document.

► Read and understand all the Operating Instructions for the system components, espe

cially the safety rules.

Commissioning

Once connected, the battery capacity indicator on the power source flashes to

indicate the current state of charge; the battery is being charged

Select Quick Charge mode if required - details on the available operating modes can

be found in the following section

If the battery is fully charged:

The COMPLETED indicator lights up on the charger

On the power source, all segments of the battery capacity indicator are lit

NOTE!

The system includes the following features for maximum user-friendliness:

► It does not matter in what order the devices are connected to the mains

► The power source can even be connected to the charger while it is in use

Содержание ActiveCharger 1000









































































Результаты поиска

Содержание ActiveCharger 1000

Отзывы:

Похожие инструкции для ActiveCharger 1000

Бренды по названию

Популярные бренды

Fronius ActiveCharger 1000, Руководство по эксплуатации

Результаты поиска

Содержание ActiveCharger 1000

Отзывы:

Похожие инструкции для ActiveCharger 1000

Бренды по названию

Популярные бренды