Fronius Acerios, Руководство по эксплуатации

Страница: 58 / 84

See the "Displaying Plasma System Resistance r" section starting on page
61 .
L
Plasma system inductance
Microhenry
See the "Displaying Plasma System Inductance L" section starting on
page
62
.
Ito Ignition time-out
Period of time until the safety cut-out following failed ignition
0.1 - 9.9 s
Factory setting: 5 s
IMPORTANT! The ignition time-out function is a safety function and can-
not be deactivated. The ignition time-out function is described on page
45 .
Arc Arc break monitoring
Period of time until the safety cut-out following an arc break
0.1 - 9.9 s
Factory setting: 2 s
IMPORTANT! Arc break monitoring is a safety function and cannot be de-
activated. The arc break monitoring function is described on page 45 .
SEt Country-specific setting
Std/US (Standard/USA)
Factory setting: Std (metric units)
E-P
External parameter
A freely selectable parameter for the robot interface
A freely selectable parameter is available for the robot interface. If "E-P"
is selected, use the selection dial to choose between the following for this
freely definable parameter:
OFF ... The freely definable parameter is not assigned (factory setting)
ELd ... Diameter of electrode
I-S ... Starting current
UPS ... UpSlope
dsl ... DownSlope
I-E ... Final current
F-P ... Pulse frequency
dcY ... Duty cycle
I-G ... Base current
The number of freely selectable parameters depends on the configuration
and the set operating mode.
ACS Automatic changeover to main current
ON/OFF
Factory setting: ON
ON
After the plasma process has started, the parameter I
main
(main current)
58