FS4.1893-Manual-30.18XX.02-EN-Version02_R1
FROMM
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2013
www.fromm-stretch.com
61
INSERTING THE FILM
1
Place the new film reel (direction of unwinding depends on the side on which the cling is
found).
Insert a film spool by moving the lever (1) down,
left, upward and then right. Insert the film reel
and return the lever to the position shown by the
figure.
Open the door using the knob (2) and
fully swing out the door .Draw out about 1 m of
film between the cover and the nearest rubber
roller as shown in Figure. Shut the door firmly.
Arrows on the inside of the roll means:
CI = CLING INSIDE
The film has to be guided through the brake system in this way when applying a "differential cling"-film
with the cling on the inside of the film when unwinding the film from the film reel.
Arrows on the outside of the roll means:
CO = CLING OUTSIDE
The film has to be guided through the brake system in this way when applying a "differential cling"-film
with the cling on the outside of the film when unwinding the film from the film reel.
The way of guiding the film through the brake system when applying a "double sided cling"-film is
basically not relevant.
Stretch film
- LLDPE Material
Max 35
µ
/ 0,000138”
- Spool core diameter
76,2 mm / 3”
- Outer diameter of spool
Max. 300 mm
- Film width
Max. 500 mm
1
2
