Fröling PE1 Pellet 10, Руководство по эксплуатации

Страница: 3 / 68

4.3.5 Change date and time 32
4.3.6 Change desired DHW tank temperature 33
4.3.7 One-time extra loading of an individual DHW tank 33
4.3.8 One-time extra loading of all existing DHW tanks. 33
4.3.9 Set the heating curve of a heating circuit 34
4.3.10 Change room temperature (heating circuit without room temperature sensor) 35
4.3.11 Change room temperature (heating circuit with room temperature sensor) 36
4.3.12 Switch heating circuit mode 36
4.3.13 Lock display/switch user level 37
4.3.14 Change the name of the components 37
4.3.15 Configure the holiday program 38
4.4 Switch the boiler ON/OFF on the room console 39
4.5 Filling the pellet store 40
4.5.1 Notes on filling the fuel stores 40
4.5.2 Correct the remaining pellet amount in store room 41
4.5.3 Adjust the pellet consumption counter to the fuel 41
4.5.4 Setting the automatic notification for minimum level 43
4.5.5 Resetting the pellet consumption counter 44
4.6 Checking the fill level of the ash container and emptying if required 44
4.6.1 Check the fill level of the ash container 45
4.6.2 Empty ash container 46
4.7 Switching off the power supply 46
5 Servicing the system 47
5.1 General information on servicing 47
5.2 Required tools 48
5.3 Maintenance work by the operator 49
5.3.1 Inspection 49
Checking the system pressure
49
Checking the safety valve
49
Checking the quick vent valve
49
5.3.2 Cleaning 50
Cleaning the burn-out tray, burner insert and combustion chamber
50
5.3.3 Periodic inspection and cleaning 51
Clean the induced draft fan
51
Clean the heat exchanger and WOS springs
52
Cleaning the flue gas pipe
53
Checking the draught controller flap
53
5.4 Servicing the DHW tank unit (optional) 54
5.4.1 Safety devices 54
5.4.2 Pressure reducing valve 54
5.4.3 Magnesium corrosion protection anode 55
5.4.4 Interior cleaning / removing limescale deposits 56
5.5 Servicing the condensing boiler heat exchanger (optional) 57
5.5.1 Inspecting the heat exchanger 57
5.5.2 Checking the condensation drain 58
5.6 Maintenance work by technicians 59
5.6.1 Checking and cleaning the combustion grate 60
5.6.2 Cleaning the measurement line of the underpressure controller 61
5.6.3 Cleaning the Lambda probe 62
5.7 Emissions measurement by chimney sweep or regulatory body 63
5.7.1 Switch on the system 63
5.7.2 Start emissions measurement 64
Contents
Operating Instructions PE1 Pellet 7-35 / PE1 Pellet Unit 7-20 | B1001020_en 3