Installation | 5
M2050222_en | Installation instructions Lambdamat LM 1500 KOM
33
r
For stoker unit with screw:
Cut out the perforation (A) on the back panels and tilt the
parts angled by hand (B) back 90°.
r
Insert and fit the two back panels on the stoker.
r
For stoker unit with screw:
fit the cover plates (A) to the left and right of the stoker
duct.
r
Fit the two front panels to the frame.
r
Secure the attachment panel (14, 15) to the left (A) and right (B) front part and fit the
front parts to the frame as shown.
Ä
Lift the door handles of the cleaning doors for easier assembly.
r
Secure the cover plate to the top left and right of the heat exchanger.
Ä
C: 1x to frame
Ä
D: 2x to attachment panel
r
Weld the cover plate to the top cover plates.
