Fritz! Fritz!Repeater 600, Конфигурация и эксплуатация

Страница: 20 / 79

Connecting to Another Router
Overview
Connect the FRITZ!Repeater as described below if your router is not a
FRITZ!Box.
You can establish the wireless connection via WPS. If the router does
not support WPS, you can use a wizard.
Requirements
• If the FRITZ!Repeater has already been in use: The factory settings
have been restored to the FRITZ!Repeater;
see page 63 .
• For wireless connections using WPS: The router must support
WPS and WPS must be enabled.
Rules
• When establishing a wireless connection, the FRITZ!Repeater
adopts the following wireless LAN settings from the router: wire­
less network name/SSID, network key, and channel settings. If
you change these settings in the router, you have to adopt the
wireless settings for the repeater again;
see page 43 .
Instructions: Establishing a Wireless Connection to the Router with WPS
1. Connect the FRITZ!Repeater to an electrical outlet in the vicinity
of the router.
2. Wait until the LED starts flashing slowly.
3. Press the “Connect” key.
The LED flashes faster.
4. Start WPS on the router. See the documentation of the router for
instructions.
5. Wait until the LED on the FRITZ!Repeater lights up.
The wireless connection to the FRITZ!Box is established.
Connecting
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
20 FRITZ!Repeater 600