Call-back on No Response (CCNR)
78
FRITZ!Box Fon ata – 7 Configuration and Operation by Telephone
Call-back on No Response (CCNR)
This function can be used when you dial a number and the
party does not respond. Once the party can be reached again
and conducts a call from her or his phone, this function rec-
ognizes when this conversation is ended. When the sub-
scriber you dialed hangs up, your telephone rings for 20 sec-
onds, as it would for an incoming call. When you pick up your
handset, the number of the desired party is automatically di-
aled again.
This feature is supported for both external and internal con-
nections.
This command can be activated five times for each port.
To enable this feature, proceed as follows:
Callback requests can also be deleted manually, with the
oldest callback request being deleted first.
M
You have just dialed a number and hear a ring tone.
5
If the call is not answered, within twenty seconds,
either dial the number “5”
or
Rs37r
the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset. As soon as the party you di-
aled conducts a conversation from her or his phone
and this call is ended, your phone rings.
N
Pick up the handset. The number of the remote par-
ty is dialed automatically.
N
Pick up the handset.
r37r
Dial the sequence shown at left.
O
Hang up the handset.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
