Fritsch premium PULVERISETTE 14, Руководство по эксплуатации, Страница: 35 / 48

6.11 Control panel
When the mill is switched on, the values of the last milling are displayed.
Other parameters can be selected by clicking on the [Menu] button in
order to change the following settings:
n
Parameter: Speed settings from 6000 - 22000 (1/min), selectable in
steps of 1000. Time, depending on which settings are selected for
the timer functions. Time frame in minutes, seconds or running a
stopwatch.
n Timer functions: You can select various settings in the menu for
these functions.
– Internal clock:
This specifies the time that is set as the duration of the grinding
process. This grinding time can be interrupted at any time by
pressing the [Stop] button.
– min / sec mode:
By clicking the [min mode] button, you can select if the set
grinding time is to be measured in minutes or seconds. When
the "min mode" shows, this has been set to minutes. When the
"sec mode" shows, it has been set to seconds.
– Stopwatch:
When the stopwatch is activated, the time required for the
grinding process is stopped when the grinding process is started.
When "Stopwatch" has been activated in the parameter set-
tings, the time unit of min or sec cannot be influenced.
n
Language: Here you can set various languages.
n
Info: This shows information on the version of the device's software,
the total run-time and the temperature at the labyrinth disc.
The start screen shows the set speed or the current speed during the
grinding process. In addition, the set time is displayed in the timer func-
tions menu item. The temperature measured at the labyrinth disc and
the load bar for the motor are also displayed.
Using the device
- 35 -