Fritsch premium PULVERISETTE 14, Руководство по эксплуатации, Страница: 23 / 48

5 Initial start-up
Perform initial start-up only after all work as described in
Ä
‘Installation’
on page 19 has been carried out.
5.1 Switching on
n Connect the device to the mains.
n Switch on the device with the main switch (7) on the front of the
device.
n
The display lights up.
5.2 Function check
CAUTION!
Only conduct the function check at a speed of 6000 1/min.
n
Open housing cover with the [Open hood] button on the
touchscreen.
n
Manually turn the hood to the side.
n
Insert labyrinth disk, collecting vessel, rotor, sieve insert and lid of
the collecting vessel.
n
Reposition the hood over the grinding element.
n Close housing cover with the [Close hood] button on the
touchscreen.
n
On the control panel, set the speed to 6000 rpm and press [START].
n
The housing cover is locked electrically and the mill runs at the pre-
selected speed.
5.3 Standstill
n
Press [STOP] on the control panel.
n
After a short time, once the mill is at standstill, the housing cover is
unlocked and can be opened via the [Open hood] button.
Initial start-up
- 23 -