Fritsch 50.9020.00, Руководство по эксплуатации

Страница: 33 / 52

2 EASY GTM Gas Pressure and Temperature Measuring System
The EASY GTM gas pressure and temperature measuring system is used
to control the grinding process and for mechanical alloying.
NOTICE!
If grinding balls with a diameter of 1 mm or smaller are
used, there is a risk of the through holes in the lid getting
clogged, which could falsify the pressure and temperature
measurement. If these ball sizes are used nevertheless, the
grinding process must not be carried out unobserved. The
intermediate lid should be checked at regular intervals
during the grinding process. When the MillControl software
is used, the pressure and temperature are displayed. If the
pressure remains constant, the cause of this may be a
clogged intermediate lid.
2.1 Case contents and system design
1 2.6 Nm torque s hexagonal bit
2 2x battery, 1.5 V, AA
3 EASY GTM system
4 Flat sealing ring, 54x2, silicone foam
5 O-ring, 21x2.5
6 Hexagon screwdriver, 3mm
7 Hexagon offset screwdriver, 2.5mm
8 Measuring/transmission unit
9 Lid
10 Compl. bowl
11 locking ring with 6 socket head screws
EASY GTM Gas Pressure and Temperature Measuring System
- 39 -