Fritsch 50.9020.00, Руководство по эксплуатации

Страница: 40 / 52

2. The PKM interfaces board (81.0011.00) is on the rear panel, with
the slot (f) for the receiver module 81.0013.00.
3. Insert the receiver module in the corresponding slot. (As illus-
trated)
4. Close the rear panel of the housing again and screw it tight.
2.6 Activating EASY GTM
If the device is protected by SOP mode (see the operating manual of the
mill in chapter "Standard Operation Procedure"), please contact the PUL-
VERISETTE-7 administrator. This mode must be deactivated, otherwise
only programs already stored can be loaded for operation.
To activate the EASY GTM system, proceed as follows:
EASY GTM Gas Pressure and Temperature Measuring System
- 46 -