12
-
NEVER
let the cord hang over the side of the table.
-
NEVER
use accessories from other appliances.
-
After use, always put the stop
plate on the “0” position. That way the cutting edge of the knife is covered.
-
Don’t overload the appliance or don’t use too much strength.
-
The appliance is equipped with a safety function. If the appliance doesn’t work, bring it back to your point of sale
for
servicing.
-
Always make sure to assemble the appliance correctly for your own safety.
-
Always place the appliance on a stable surface, like a kitchen table so that the appliance cannot shift of fall.
-
NEVER
pull the cord to unplug the appliance, only use the plug.
-
NEVER
open the appliance and
NEVER
put strange objects in the appliance.
-
NEVER
use the appliance in the proximity of hands, hair, cloths and other objects in order to avoid damage and
injuries.
-
Do not use aggressive cleaning products.
-
Repairs can only be done by and recognized repair shop.
2.
TECHNICAL INFORMATION
-
You will find the technical information on the rating label at the bottom of the appliance.
-
Use the appliance for a maximum time of 10 minutes at the time.
-
The mandatory time between 2 sessions in order for the motor to be able to cool down is 30 minutes.
3.
BEFORE THE FIRST USE
-
Remove all packaging and stickers.
-
Keep packaging away from children.
-
First check your appliances for possible damages. If it is damaged, do NOT use the appliance but bring it back to your
sales point.
-
Before the first use we recommend to clean all components thoroughly (see 5.
‘Cleaning’).
-
All parts should be dry!
-
Ensure that the voltage marked on the appliance is the same as your main voltage. According to the safety law: only
use earthed sockets.
4.
USE OF THE SLICER
-
With the electrical slicer from FRITEL you can slice bread, sausage, bacon, cheese, vegetables and fruit.
-
The appliance is not intended to slice hard materials such as wood, bones, cans,
…
-
The knife needs to be applied correctly. Secure the button by turning it to the left.
-
3 positions switch :
•
0 : off
•
1 : continious function. The knife keeps on turning, as long as this position is activated.
•
2 : Push function . The knife stops turning, when you release the button.
-
Put the carriage and the rest holder in the right position before use.
NEVER
use the appliance without carriage and rest
holder.
-
Activate the appliance by using the position 1 or 2.
-
With the control button you can adjust the slicing thickness (0-20 mm).
-
Put the tray under the slicer.
-
Put the food on the carriage and push against the stop plate. Protect your thumb by placing it behind the rest holder.
-
Slowly and steadily push the carriage to the turning universal knife, for general use. Use a little strength for the best
result.
-
Reset the 3 positions switch to the position “0” after use.
-
Wait until the blade has completely stopped.
-
Turn the control button for the slcing thickness to the position “0”.
TIP: moisten the knife with a wet towel to cut cheese.
TIP: Very thin slicing (for example: carpaccio) is easier, when the food is chilled a little.
