manualshive.com logo in svg

Fristam Pumps FKL 15, Оригинальное руководство пользователя, Страница: 35 / 40

Поделиться
Скачать
Fristam Pumps FKL 15 Скачать руководство пользователя страница 35

35

Fig. 44

Moving with pallet truck

12.4.3 Moving With Crane

WARNING

Falling Parts

Death from crushing, severe pinching of extremities, material 
damage.

►

Only use suitable means of conveyance and hoists that are 
designed for the total weight of the pump.

Information on the pump weight can be found on the 
pump's rating plate as well as in the 

Order-Related Docu-

ments

 in the attached documents.

►

Do not leave the pump in a raised position for longer than 
necessary.

►

Ensure that the area below the pump is clear of people.

WARNING

Swinging Parts

Crushing and serious injuries. 

►

Start and stop the crane with pump smoothly. 

►

Ensure that the danger zone of the pump is clear of people. 

Auxiliary Equipment

– Hoists: round slings tested in accordance with DIN EN 1492-

1 and 1492-2

Preparation

►

Remove load-securing devices. 

.

Fig. 45

Moving with round sling

Procedure

1.

Warning:

 Round sling damage and tearing. Death from 

crushing, severe pinching, material damage. 

►

Do not lay the round sling over any sharp edges or cor-
ners.

Wrap the round sling around the casing and the drive shaft; 
see 

Fig. 45, "Moving with round sling," page 35

.

2. For double shaft seal: 

Note:

 Round sling compresses sealing water tubes. Material 

damage to double shaft seal.

►

Do not lay the round sling on the sealing water tubes.

3. Cross one sling loop over the other and hook over the hook 

to ensure that the belt will not slip on the hook.

4. Position the center of gravity to ensure that the pump is lift-

ed horizontally.

5. Lift the pump.

12.5 Installation Location

Please see the operator's manual 

Chapter 6.2, "Installation Loca-

tion," page 11

 for the basic installation location requirements.

12.6 Pump Installation

Prerequisites (Customer-Side)

– Suitable gear motor

– Adequately sized coupling

– Common installation surface for gear motor and pump so 

that pump shaft can be aligned with gear motor shaft  

Содержание FKL 15









































Отзывы:

Нет отзывов