Frigomat Mix 8 Series, Руководство по использованию и обслуживанию, Страница: 22 / 57

ENGLISH - 6
3. INSTALLATION
3.1 FIELD OF USE
The MIX 8 electronic cookers are expressly designed and engineered for the preparation
of hot mixes for ice cream or other gastronomic specialities.
3.2 LIMITS OF USE
Never use the machine with variable supply voltage and/or more than +/- 10% of the value
shown in the nameplate or when the feeder is damaged;
Do not use the machine for other purposes than those indicated in the present manual;
Do not use the machine in explosive environment;
Do not wash the machine with high-pressure jets of water or poisonous substances;
Do not expose the machine to excessive heat or humidity;
Do not use unbalanced mixes and/or quantities which are not in compliance with the
specifications reported on the packing.
3.3
MACHINE OUTFIT
- Cleaning rod
- Stiff paddle
- Seal removing tool
- Seal
Kit
- Manual of use and maintenance
- Declaration of conformity
- Certificate of guarantee
- Frigomat
lubricant
3.4 COMMISSIONING
Bring the machine to its dedicated location and check that everything is available as far
as installation concerns:
•
The machine shall be away from walls or other obstacles, at least 10 cm sideways and
30 cm from the rear
•
Ensure that the supply voltage and power comply with the values reported on the rating
plate placed on the back panel;
•
Connect the machine to the mains; upstream the machine, arrange an omnipolar
master switch with minimum contact opening equal to 3 mm and adequate power,
interlocked with fuses to allow plugging and unplugging at open circuit.
•
Connect the feeder to a type-approved plug: the feeder shall be well stretched, to avoid
rolling and overlapping. It shall not be exposed to possible shocks or tampering
attempts and far from liquids, water and heat sources. In case of damages, revert to
qualified personnel for replacement. Section and type as follows: 3G1,5 H05VV-F.
•
Connect the yellow-green wire to a good earth connection.
•
The ideal temperature shall range between 15°C and 25°C
•
The ideal humidity shall range between 30 and 60%
•
Check and, if necessary, lubricate the seals inside the dispensing tap as shown in the
picture: