manualshive.com logo in svg

Frigobox HCNJ 261 G, Руководство по обслуживанию

Поделиться
Скачать
Frigobox HCNJ 261 G Скачать руководство пользователя страница 33

INSTALLATION INSTRUCTION FOR SPLIT TYPE AIR CONDITIONER

Model:  HKEJ- HCNJ 261 G     - HKEJ - HCNJ 351 G 

INSTALLATION GUIDE

 

• This air conditioner needs standard safety and operation promulgated by the Nation.

• You need to invite professional air conditioner service and maintenance personnel to
install or remove the air conditioner. Problems may occur and you may suffer losses if
non-professional install the air conditioner.

• User shall provide the power that meets installation and operation and requirements.
The voltage for this product is 198-253V~. Voltage exceeding this scope will affect the
normal operation of the air conditioner.

• Separate line that is installed with delay fuse protector or automatic breaker should
be used for the air conditioner.

• The air conditioner must be correctly and reliably grounded, or it may cause electric
shock or fire.

• Do not connect the power of the air conditioner before well connecting and carefully
checking the tubing and wires.

• The appliance shall not be installed in laundry or bathroom.

• The air conditioner can be connected only to a supply with system impedance no
more than 0.35 ohm (0.16 ohm for HKEJ-HCNJ 351 G). If necessary, please consult
your supply authority for system impedance information.

• The instruction is subject to change without notice. 

INSTALLATION OF ACCESSORIES

 

• Examine carefully the attached packing list and check whether the accessories are

complete.

• Users may need to buy at their own expenses the articles not included in the packing

list and may be needed in installing.

10. Installation

Содержание HCNJ 261 G























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды