Frigidaire MWV150KB, Руководство по установке

Страница: 40 / 72

•
•
Parte trasera
del microondas
Instrucciones de instalación
B1.
•
•
•
B2.
B
Placa del ventilador
3/8" TO EDGE



 













NOTE: IT IS VE
RY IMPOR
TANT TO
READ AND
FOLLOW
THE DIREC
TIONS
IN THE IN
STALLATIO
N INSTRUCTIO
NS
BEFORE PR
OCEEDING
WITH THIS
REAR WALL
TEMPLATE
.
This Rear Wall
Template serv
es to position
the bottom
mounting pla
te and to locate
the horizontal
exhaust
outlet.
1. Use a level
to check
that the templa
te is positione
d
accurat
ely. 2. Locate and
mark at least one
stud on the lef
t or
right side
of the centerline. 
It is important
to use at leas
t one wood
screw moun
ted firmly in a st
ud to support
the weight
of the microw
ave. Mark two
additional, evenly
spaced
locations for
the supplied
toggle bolts.
3. Drill holes
in the marked
locations. Wh
ere there is
a stud, drill a
3/16" hole for wood
screws.
For holes
that do not li
ne up with a st
ud, drill 5/8" hole
s for
toggle bolts.

DO NOT INST
ALL THE MOUNT
ING PLATE
AT THIS TIME.
4. Remove the
template from
the rear wall.
5. Review
the Installation
Instruction boo
k for your
installation
situation.
Locate and
mark hol
es to align w
ith holes in the
mounting p
late. IMPORTA
NT:
LOCATE
AT LEAST ON
E STUD ON EITH
ER SIDE OF
THE CENTER
LINE. MARK TH
E LOCATION FOR
2 ADDITIONAL
, EVENLY
SPACED TOGG
LE BOLTS IN
THE MOU
NTING PLA
TE
AREA.
Locate and
mark hol
es to align w
ith holes in the
mounting plate
. IMPORTA
NT:
LOCATE
AT LEAST ON
E STUD O
N EITHER SIDE
OF
THE CENTER
LINE. MARK TH
E LOCAT
ION FOR
2 ADDITIONAL
, EVEN
LY
SPACED TOGG
LE BOLTS
IN THE MOU
NTING PLA
TE
AREA.
Trim the rea
r wall templa
te along the d
otted line.
Trim the rea
r wall templa
te along the
dotted line.













12"
4"
Darle vuelta
a la hoja para
consultar la
versión en Españ
ol.
Asegúrese de que los tornillos del
motor del ventilador y la placa del
ventilador queden firmemente
apretados al volver a instalarlos. Esto
ayudará a prevenir el exceso de
vibraciones.
Asegúrese de que el cableado del
motor quede debidamente orientado y
asegurado, y que los cables no queden
atrapados.
EXTRACCIÓN TRASERA EXTERNA
(Conducto Horizontal)
DESCRIPCIÓN GENERAL DE LA INSTALACIÓN
B1. Preparación de la pared trasera
B2. Desinstalación del placa del ventilador
B3. Montaje de la placa de instalación en la pared
B4. Preparación del gabinete superior
B5. Ajuste del ventilador
B6. Instalación del horno microondas
NOTAS IMPORTANTES:
Lea las instrucciones de la sección PLANTILLA PARA LA PARED
TRASERA.
Adhiera con cinta la plantilla a la pared trasera, alineándola
con los agujeros previamente taladrados pares coincidir con
los agujeros A y B en la placa para la pared.
Realice el corte de la abertura, siguiendo las instrucciones de
la sección PLANTILLA PARA LA PARED TRASERA.
PREPARACIÓN DE LA PARED
TRASERA PARA LA SALIDA DE
EXTRACCIÓN TRASERA EXTERNA
Es necesario realizar un corte en la pared trasera para crear una
abertura para la salida de extracción externa.
DESINSTALACIÓN DEL PLACA
DEL VENTILADOR
Quite y guarde el tornillo que sujeta la placa del ventilador al
microondas. Levante la placa del ventilador para retirarla.
SP-16
3/8" TO EDGE










NOTE: IT IS VERY IMPORTANT
TO
READ AND FOLLOW THE
DIRECTIONS
IN THE INSTALLATION INST
RUCTIONS
BEFORE PROCEEDING WITH T
HIS
REAR WALL TEMPLATE.
This Rear Wall Template ser
ves to position the bottom
mounting plate and to locate t
he horizontal exhaust
outlet.
1. Use a level to check that th e template is positioned
accurately.
2. Locate and mark at least o
ne stud on the left or
right side of the centerline.
 It is important to use at least one
wood
screw mounted firmly in a stud to support the weight
of the microwave. Mark two ad ditional, evenly spaced
locations for the supplied tog
gle bolts.
3. Drill holes in the marked lo
cations. Where there is
a stud, drill a 3/16" hole for
wood screws. For holes
that do not line up with a s
tud, drill 5/8" holes for
toggle bolts.
 DO NOT INSTALL THE MOUNT ING PLATE
AT THIS TIME.
4. Remove the template from th
e rear wall.
5. Review the Installation Ins truction book for your
installation situation.
Locate and mark holes to align wit
h holes in the
mounting plate.
IMPORTANT:
LOCATE AT LEAST ONE STUD O
N EITHER SIDE OF
THE CENTERLINE.
MARK THE LOCATION FO
R 2 ADDITIONAL, EVENLY
SPACED TOGGLE BOLTS I
N THE MOUNTING PLATE
AREA.
Locate and mark holes to align w
ith holes in the
mounting plate.
IMPORTANT:
LOCATE AT LEAST ONE S
TUD ON EITHER SIDE OF
THE CENTERLINE.
MARK THE LOCATION FO R 2 ADDITIONAL, EVENLY
SPACED TOGGLE BOLTS IN
THE MOUNTING PLATE
AREA.
Trim the rear wall template along
the dotted line.
Trim the rear wall template along
the dotted line.




 
12"
4"
Darle vuelta a la hoja para cons ultar la
versión en Español.