25
The following repairs will require removing the
dishwasher from under the counter. Before starting
the repair, disconnect the power to the product, also
make sure others are aware that you have turned
this off for your safety. Turn off the water supply to
the dishwasher and mark the valve as being turned
off this is again for safety. After the utilities have
been turned off, lower the dishwasher as much as
possible to prevent damage to the counter. Always
use floor protection as the unit is pulled forward.
Vent and fan assembly mounting nut.
DELIVERY TUBE
1. With dishwasher removed from under counter
top unscrew and remove the upper spray arm.
This unscrews counter clockwise.
2. Remove mounting screw in back of tub. See
Figure 52
3. Remove clamp from sump end of tub and
remove tube.
4. Check hole in back of tub for
grommet to be sure it is
smooth and no extra plastic
around opening
5. Install gourmet from inside
tub, outside flange must be
flat on back of tub. See
Figure 53
6. To install tube start by placing tube in top of tub
and installing upper spray arm loosely.
7. Place center opening of delivery tub into the tub.
Be sure to hold grommet in place while pressing
tube into opening.
1
.
With the dishwasher removed from under the
counter either remove the upper rack or just pull
forward to access the vent assembly
Vent and Fan Assembly
2. The locking collar holding the assembly in place
turns off to the left (counterclockwise). See
Figure 54
3. Installing new assembly be sure gasket is in
place and collar locks on completely to prevent
leaks. See Figure 56
mounting screw
tube
outside flange
8. Reinstall tube on to sump then install center
screw.
9. Tighten both upper spray arm mounting nut and
clamp on sump.
This is a very tight
fit pressing down
on the outside of
the assembly can
help in removing
part See Figure
55
Figure 52
Figure 53
Figure 54
Figure 55
Figure 56
