12
13
oven temperature falls below the set temperature, the
element switches on and the oven indicator light comes
on again.
WARNING
CAUTION
Once the food is cooked, turn the temperature selector
back in an anti-clockwise direction. Do not force it right
round in a clockwise direction as this will result in damage
to the thermostat.
NOTE: For multifunction ovens the desired cooking
function must be selected before the oven will operate.
Once the desired function has been selected, use the
temperature selector to set the required temperature.
Pre-heating your appliance
For best results when baking you must pre-heat the
oven for 30 minutes. Pre-heat the grill for 3 minutes to
obtain best results. Pre-heating your appliance allows it
to reach the required temperature quickly and efficiently.
When baking bread or cakes, load the oven as quickly as
possible after pre-heating and leave the oven door open
for the shortest time. This will minimise loss of heat from
the oven and ensure the best results.
Pre-heating with “Rapid Heat” (selected models
only)
For electric multifunction appliances preheat your oven
by selecting the “rapid heat” function. This function allows
your oven to reach the preset temperature quicker than
any other cooking function.
• Turn the function selector to “Rapid Heat”.
• Set the desired pre-heat temperature, by rotating
your oven temperature selector. When the indicator
light goes out the oven has reached the desired
preset temperature. Select the oven function you
require for cooking or baking and place your food
into the oven.
Pre-heating with other functions
• It is recommended you preheat your appliance when
cooking or baking.
• Set the desired pre-heat temperature, by rotating
your oven temperature selector. When the indicator
light goes out the oven has reached the desired
preset temperature, place your food into the oven.
Pre-heating “grill”
• Preheat the grill for at least 3 minutes to obtain best
results. This will help to seal the natural juices of
steak, chops and other meats for a better flavour.
TIPS & INFORMATION
IMPORTANT
Cooling/Venting fan
This appliance is fitted with a cooling fan. This prevents
your kitchen cabinet from overheating and reduces the
condensation inside the oven. It will operate whenever
you are using the oven and blow warm air across the top
of the oven door.
NOTE: For selected models only. When setting delayed
start, the cooling fan will operate as soon as the function
is selected. This will minimise condensation build up in
the appliance..
Condensation and steam
This appliance is supplied with an exclusive system which
produces a natural circulation of air and the constant
recycling of steam. This steam makes it possible to
cook in a steamy environment ensuring that dishes are
soft inside and crusty on the outside. This process also
reduces cooking time and energy consumption. During
cooking, steam may be produced and released when the
door is opened. This is absolutely normal. When food is
heated, it produces steam in the same way a boiling kettle
does. When steam comes into contact with the oven door
glass, it will condense and produce water droplets. To
reduce condensation, ensure that the oven is pre-heated
before placing food in the oven cavity. It is recommended
that condensation is wiped away after each use of
the oven.
The effects of dishes on cooking results
Dishes and tins vary in their thickness, conductivity, colour
etc. which affects the way they transfer heat to the food.
• Aluminium, earthenware, oven glassware and bright
shiny utensils reduce cooking and base browning.
• Enamelled cast iron, anodized aluminium, aluminium
with non-stick interior and coloured exterior and dark,
heavy utensils increase cooking and base browning.
• To increase base browning simply lower the shelf
position. To increase top browning, raise the
shelf position.
• Always place dishes centrally on the shelf to ensure
even browning.
• Single level cooking gives best results in conventional
modes. If cooking on more than one level use a fan
cooking function.
Operating your oven temperature selector
(FRVE614 model)
A thermostat controls the temperature in your appliance.
The temperature can be selected within the specified
range. To set the temperature, turn the temperature
selector in a clockwise direction to the desired setting. An
indicator light above the temperature selector will come
on. When the set temperature is reached, the element
switches off and the indicator light goes off. When the
USING YOUR OVEN
NOTE: The clock has a 24 hour display.
Changing the time of day
1.
Press
until the “Clock” indicator symbol
begins flashing.
2. To set the time of day, press the or symbols
while the “Clock” indicator symbol is flashing.
3. After 5 seconds from the last change, the “Clock”
indicator symbol will disappear, confirming the
time has been set.
Setting the minute minder
1.
Press
until the “Timer” indicator symbol
begins flashing.
2. Set the countdown time by using and symbols
while the “Timer” indicator symbol is flashing.
3. After 5 seconds from the last change, the “Timer”
indicator symbol will stop flashing, confirming the
timer has been set. The countdown time remaining
will appear on the display.
4. Once the set time has elapsed, a beeper will sound
for 1 minute. The time indication “0.00” and a flashing
“Timer” indicator symbol will appear on the display.
5. To stop the beeper, press , symbols or
.
NOTE: This feature has no effect on the oven operation.
With the minder operating, the time of day cannot be
displayed.
Setting the cooking duration
1. Select the desired oven
and
.
The oven indicator light will appear and the heating
source will switch on.
2.
Press
until the
indicator symbol
begins flashing.
3. Set the cooking duration by using or symbols
while the
indicator symbol
is flashing.
4. After 5 seconds from the last change, the
indicator symbol
will stop flashing, and the time of
day will be displayed.
Cooking with your timer (selected models only)
WARNING
CAUTION
Set the timer clockwise. Do not force anticlockwise or
damage to the timer will result.
120 minute “Auto off” timer
The 120 minute timer features an automatic oven cut off
This means that a cooking period of up to 120 minutes
can be set. When the timer has counted back to “Auto
off”, a bell will sound and the oven will automatically
switch off.
Once automatic baking is complete, return to manual
operation by setting the timer to the “OFF” mark.
Operating the FRVE615 electronic clock
General features
The oven is equipped with an electronic clock that can
be used to turn the oven on and off automatically. The
function automatically turns the oven off after
a set amount of time.
NOTE: Your touch control clock only
operates with your main oven.
Setting the time
Before the appliance can be used, the time must be set.
After the appliance has been electrically connected,
“12:00” will be displayed and the clock icon will flash.
To set the time of day in hours and minutes, touch the
or symbols. Refer to the diagram above.
5 seconds after the last change, the clock symbol will
disappear, confirming the time has been set. Once the
time has been entered, the clock advances minute by
minute.
USING YOUR OVEN (CONTINUED)
USING YOUR OVEN
