31
CARE AND CLEANING
30
CARE AND CLEANING
CARE AND CLEANING (CONTINUED)
• Insert the black bordered glass panel into the upper
position, ensuring the painted surface is facing the
downside as per the image below.
Replacing the top door trim
• Hold the top door trim at each side and position it to
the inside edge of the glass.
• Push the trim down with its top edge over the glass
panel until the clip snap in on each side of the trim.
• Push the middle of the trim down to ensure it is
straight and firm against the glass panel.
Fitting the oven door
• Take hold of the oven door with a hand on each side
and with the door at an angle of 30˚, position the
recesses at the bottom of the door onto the hinge
arms of the oven. Let the door slide down the hinge
arms as far as it will go.
• Open the door fully to access the hinges.
• Rotate the ‘stirrups’ (see the image below) until they
lock into the hook. The oven door may now be closed.
stirrup in locked
position
door
column
Pyrolytic Cleaning of the Oven Cavity
(FRVEP615 model only)
The oven has the Pyrolytic self-cleaning function, it
cleans by burning off the spatters and accumulated dirt
and grease from the oven liner, at high temperature. This
process produces ash which can then be wiped out of
the oven cavity. It is recommended you clean your oven
regularly to keep the oven in its best condition.
• Light clean - this is an energy saving cycle that can
be used on a regular basis if the oven is lightly soiled.
Possibly after every 2nd or 3rd roast.
• Normal clean - use this as the regular cycle about
once every 2-3 months.
Before carrying out the Pyrolytic cleaning function
WARNING
WARNING
• Clean large deposits, spills or grease from the
oven cavity.
• Please keep small children at a safe distance. The
appliance becomes very hot.
• Never clean non-stick baking trays and tins in the
oven during the pyrolytic cycle. High temperatures
damage the non-stick coating and poisonous gas
is released.
• Pyrolytic cleaning can release fumes that are not
harmful to humans, including infants or persons
with medical conditions, however you are strongly
advised to provide good ventilation during and after
each pyrolytic cleaning process.
• Unlike humans, some birds and reptiles can be
extremely sensitive to the potential fumes emitted
during the pyrolytic cleaning process. It is strongly
advised to remove any pets (especially birds) from
the vicinity of the appliance during and after each
pyrolytic cleaning process.
• Small pets can also be highly sensitive to the
localized temperature changes in the vicinity of all
pyrolytic ovens when the pyrolytic self cleaning
program is in operation.
WARNING
CAUTION
• All accessories must be removed from the oven,
including shelves, trays and side racks.
• During pyrolytic cleaning the air outlet vent above
the door must be kept clear of any obstruction (e.g.
tea towels).
• Do not use your oven to clean miscellaneous items
(e.g. cookware).
• To prevent damage, do not use acids, sprays or
similar cleaning agents.
TIPS & INFORMATION
IMPORTANT
During the pyrolytic cleaning function, it is advisable
not to use a cooktop if it is fitted above the oven. This
could cause overheating and damage to both appliances.
The cooling fan will operate at an increased speed for
pyrolytic cleaning and will continue to run until the oven
has cooled down. It is recommended to use the Pyro
clean function regularly to keep the oven in its
best condition.
Starting the Pyrolytic cleaning function
(FRVEP615 model only)
•
Make sure all accessories are removed from the oven
including shelves, trays and side racks.
• Turn the oven “Function” selector clockwise to select
the “Pyro” position.
• Use the or buttons on the electronic clock to
CARE AND CLEANING (CONTINUED)
select between a pyrolytic cleaning time of 1:30 hours
(light clean) or 2:30 hours (normal clean) for the
appropriate level of cleaning.
• After 5 seconds from the last change, the oven
will begin heating and the “Remaining time” will
be displayed.
• The pyrolytic cleaning function can be stopped at any
time during the cycle by turning the function selector
counter-clockwise to the “OFF” position.
NOTE: The “Remaining time” does not include cool-down
time for the oven.
During Pyrolytic cleaning
When the temperature in the oven approaches 300˚C,
the door will automatically lock and a padlock symbol will
appear on the display.
After Pyrolytic cleaning
The door will only unlock when the oven has cooled to a
safe temperature. Turning the function off will not unlock
the door.
After cool-down, wipe the ash out of the oven with a soft
damp cloth and warm water. To restore the enamel shine
to more difficult areas, use a damp cloth with vinegar
and detergent.
WARNING
CAUTION
Do not turn off the mains power supply to the oven
during the pyrolytic cleaning cycle. This could damage
the appliance.
TROUBLESHOOTING
Faults
If there is a problem with the oven, please:
•
Check the points listed below. It may be possible to
avoid a call by fixing the problem yourself – and so
continue cooking.
•
For cooking problems refer to “Dealing with
cooking problems”.
.
Data Plate
When you need information, service or spare parts please
be prepared to tell us the:
• Model number
• Serial number
These are shown on the data plate. The data plate is
visible when the oven or grill door is open.
