4. Light the burner.
Refer to "Hob - Daily use" chapter.
5. Turn the knob for the hob to the
minimum position.
6. Remove the knob for the hob again.
7. Screw on slowly the bypass screw till
the flame becomes minimum and
stable.
8. Put the knob for the hob back on.
Oven injector replacement
1. Remove the bottom plate of the oven
cavity to get access to the oven burner .
2. Carefully remove from the burner the
thermocouple A. Next remove the spark
plug B.
A
B
3. Unscrew the screw and slowly pull out
the burner.
1
2
4. Release the burner injector with a 7 mm
socket spanner and replace it with a
right one.
Assemble the burner in a revers sequence.
Replace the gas type sticker near the gas
supply ramp with the one related to the new
gas type.
Adjusting the minimum gas
level on the oven burner
1. Disconnect the appliance from the
electricity.
2. Remove the knob for the oven
functions. If there is no access to the
bypass screw dismount the control
panel before adjustment start.
3. With a thin and flat screwdriver adjust
the bypass screw A.
The model determines the position of
the bypass screw A.
34
INSTALLATION
Содержание FNGB90JFUW
Страница 39: ......
Страница 40: ...867354468 A 492020 ...