19
CARE AND CLEANING
Removing and Replacing the Oven Door
To remove the oven door
:
1.
Open oven door completely, horizontal with floor (
).
2.
Pull the door hinge locks on both left and right door
hinges down from the oven frame completely toward
the oven door (
). A tool such as a small
flat-blade screwdriver may be required.
3.
Firmly grasp both sides of oven door along the sides.
Do not use the oven door handle (
).
4.
Close the door to approximately 10 degrees from the
door frame (
).
5.
Lift the oven door hinge arms over the roller pins
located on each side of the oven frame (
).
To Replace Oven Door:
1.
Firmly grasp both sides of oven door along the door
sides. Do not use the door handle (
2.
Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame (
and
). The hooks of the hinge arms
must be fully seated onto the roller pins.
3.
Open the oven door horizontal with floor (
).
4.
Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the
locked position (
).
5.
Close the oven door.
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
Special door care instructions - Most oven doors contain
glass that can break. Do not close the oven door until all
the oven racks are positioned correctly in the cavity. Do
not hit the glass with bakeware or any other objects.
Scratching, hitting, jarring, or stressing the glass may
weaken its structure, causing an increased risk of
breakage at a later time.
CAUTION
IMPORTANT
Figure 8:
Door hinge location
Figure 9:
Door hinge locks
Figure 10: Holding door for removal/replacement
Figure 11: Replacement and location of hinge arm and
roller pin
Oven door
hinge
locations
LOCK
about
10°
hinge
oven
door
roller
pin
hinge
arm
